TENKER Air Purifier for Home with Dual HEPA & PM2.5 Sensor, CADR 300 m³/h

Tenker AP300 air purifier – CADR 300 m³/h, dual-sided intake, washable dual-sided filters, PM2.5 smart sensor, auto mode + aromatherapy

The bottom line – why your home deserves the ap300?

Every breath you take matters. Yet the air inside your home can be up to 5 times more polluted than outdoor air – filled with dust, pet dander, smoke, and invisible allergens that can affect your sleep, your health, and your family's well-being.

The Tenker AP300 is here to change that. This is not just another air purifier. It is a complete air management system that combines dual-sided intake, medical-grade H13 HEPA filtration, and a smart PM2.5 sensor to deliver fresh, clean air for large rooms up to 3000 sq.ft. With CADR 300 m³/h, it refreshes a 500 sq.ft room in just 12 minutes.

The washable dual-sided filters save you money on replacements, while intelligent auto mode adjusts fan speed automatically based on real-time air quality. Add built-in aromatherapy, whisper-quiet 15 dB sleep mode, and child lock – and you have everything you need for a healthier, more comfortable home.

Do not just filter your air – transform it. Experience the Tenker difference.

1. dual-sided air intake + CADR 300 m³/h – covers 3000 sq.ft

The Tenker AP300 draws air from both sides simultaneously, purifying faster than traditional single-intake models. With a CADR of 300 m³/h, it covers large rooms up to 3000 sq.ft (1 air change per hour) and refreshes a 500 sq.ft room in just 12 minutes – fast enough to make a noticeable difference before your morning coffee finishes brewing.

The medical-grade H13 HEPA filter captures 99.97% of airborne particles as small as 0.3 microns – including smoke, dust, pollen, pet dander, and household odors.

2. washable dual-sided filters – ideal for pet owners

The AP300 comes with two washable pre-filters that trap pet hair, lint, and large dust particles. Simply rinse them with water every 2–4 weeks to maintain peak performance and save on replacement costs.

The upgraded dual-layer activated carbon filter effectively absorbs pet odors, cooking smells, cigarette smoke, and VOCs – a practical choice for pet lovers and allergy sufferers.

3. PM2.5 smart sensor + auto mode – intelligent and energy-saving

The built-in PM2.5 laser sensor monitors air quality in real time and displays it via a color ring (green = good, yellow = moderate, red = poor). In auto mode, the fan speed automatically adjusts to the surrounding air quality, helping to save electricity and remove guesswork.

4. 6 fan speeds + timer + low energy cost

Choose from 6 speeds (sleep, low, medium, high, turbo) to match your needs – from quiet night operation to maximum purification. Set the timer for 2, 4, or 8 hours for sleep or when you go out.

Running at maximum speed for 24 hours, the AP300 consumes only 0.6 kWh – less than a traditional light bulb.

5. built-in aromatherapy diffuser – add a pleasant scent

Place a few drops of your favorite essential oil on the aromatherapy pad located on top of the AP300. As clean air flows through, it carries the fragrance throughout the room – useful for masking unpleasant odors or creating a relaxing atmosphere.

The aromatherapy pad is pre-installed; no extra accessories are needed.

6. whisper-quiet 15 dB sleep mode – no light disturbance

In sleep mode, the AP300 runs as low as 15 dB. All indicator lights dim or turn off to avoid disturbing your rest. This setting is suitable for bedrooms, nurseries, or home offices.

7. child lock + filter replacement reminder

The child lock prevents children or pets from accidentally changing settings. The filter replacement reminder lights up when it is time to replace the filter – typically every 3–6 months depending on usage. Use official Tenker replacement filters for optimal performance.

8. more reasons to choose Tenker AP300

• ultra-low energy consumption
  At maximum speed for 24 hours, the AP300 consumes only 0.6 kWh, so you can run it continuously with minimal impact on your electricity bill.
• sleep mode with low disturbance
  One-touch sleep mode dims indicator lights and reduces fan speed to near-silent operation around 15 dB.
• simple touch controls and intuitive interface
  The LED display and touch buttons make it easy to switch modes, adjust fan speed, set the timer, or check PM2.5 levels.
• safe for children and pets
  The AP300 features a rounded design with no exposed sharp edges. The child lock helps prevent accidental changes to settings.

Specifications

• model: Tenker AP300
• CADR: 300 m³/h
• coverage: up to 3000 sq.ft (1 air change per hour)
• filter layers: 2 washable pre-filters + H13 HEPA + activated carbon
• PM2.5 sensor: real-time laser sensor with color ring
• fan speeds: 6 (sleep, low, medium, high, turbo)
• timer: 2, 4, 8 hours
• noise level: ≤ 15 dB (sleep mode)
• power consumption: 0.6 kWh per 24 h at maximum speed
• aromatherapy: built-in pad
• child lock: yes
• filter replacement reminder: yes

What is in the box

• 1 × Tenker AP300 air purifier
• 2 × washable pre-filters
• 2 × H13 HEPA + carbon filter (pre-installed)
• 1 × user manual

Customer support

Tenker offers a 2-year warranty and 24/7 customer support. For questions or issues, contact support through Amazon; responses are typically provided within 24 hours.